-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
GPC Electronics Enhances Inspection Capabilities
March 30, 2017 | GPC ElectronicsEstimated reading time: 1 minute
Modern communications products are becoming more challenging to manufacture with high density of placements and miniature devices. As a result, traditional human eye inspection methods are no longer effective. For example, 0201 is now common and 01005 and 008004 (0.25mm x 0.125mm) are coming through. These types of components cannot be effectively inspected by the human-eye, even with the aid of modern camera based inspection systems.
Older AOI systems were unreliable and ineffective due to the high level of operator intervention required due to “false failures” and the need to fine tune the equipment on-line. The ability to use flying probe and in-circuit test (ICT) becomes costly and impractical due to high component density that then results in a lack of test access.
When a number of OEMs in the field of high speed networking and communications products partnered with GPC Electronics, the challenge was verifying PCBA products with typically more than 5,000 placements, component footprints of 0201 or less and with limited or no test access.
The answer was to invest in the most modern AOI equipment available. With installations in GPC Electronics’ Australian, New Zealand and Chinese factories, the advanced AOI provides faster and more reliable inspection. The GPC Electronics advanced AOI can detect a comprehensive range of defects and errors. The key feature is the 4 MPX color camera with an optical resolution of 10µm–15µm. The advanced AOI uses dynamic imaging and its inspection functions include detecting missing components, tomb-stoning, bill-boarding, polarity resolution, wrong marking (OCV) and upside down or defective components. It can also detect excess solder, insufficient solder, bridging, through-hole pins as well as scratches and contamination. All this can be achieved in seconds even for the highest density PCBA’s, whereas more traditional test methods such as flying probe may take 10 minutes or more and still not provide adequate test coverage.
In addition to the ability to remove human eye inspection and achieve faster cycle times, the advanced AOI system provides GPC Electronics rapid process feedback. Moreover, due to the pre-determined programmed parameters, faults can be identified with consistency well before any final or functional test. This early stage verification provides higher product yields and the ability to rationalize down-stream test processes.
Reliability and consistency are the key to driving efficiency and low cost. The introduction of advanced AOI equipment has provided a valuable addition to GPC Electronics' capabilities.
Suggested Items
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.