Ready, Jet...Print!
June 10, 2019 | KAUSTEstimated reading time: 2 minutes
Inkjet printing is expected to fast track the commercialization of organic solar cells. Researchers from the KAUST Solar Center have exploited this technique to generate high-efficiency solar cells at large scales.
Image Caption: Daniel Corzo has developed an inkjet-printing approach to fabricate high-efficiency organic solar cells at a large scale.
Organic photovoltaic materials could soon replace inorganic semiconductors in solar-powered devices because of their lightness, flexibility and low cost. These materials are easy to modify and process in solution, which makes them highly attractive for customization and large-scale production. In particular, customized solar cell designs can be used in conjunction with other printed electronics to power a plethora of applications, such as disposable electronics, intelligent packaging, interactive printed media and lab-on-a-chip devices.
Nonfullerene acceptors are emerging materials that have helped boost the efficiency of organic solar cells close to commercialization. These components are typically blended with electron donors in a light-responsive electrochemical layer. They have proven effective for drawing the light-generated pairs of electrons and negatively charged holes apart and maintaining electric current when exposed to sunlight. However, scale-up and manufacturing challenges have hindered efforts to transfer these materials from the laboratory to industrial and consumer-ready scales.
To bridge this gap, Derya Baran and her colleagues have engineered inkjet-printable solar materials containing a nonfullerene acceptor and deposited these inks over large areas to produce photovoltaic cells. The resulting devices achieved efficiencies of six percent, which is comparable to the efficiencies of their spin-coated analogs.
Ph.D. candidate Daniel Corzo explains that inkjet printing presents several advantages over traditional spin-coating and blade-coating deposition techniques, including low material consumption and rapid design changes through digital platforms. “This enables low-cost manufacturing, patterning into complex shapes, and multilayered device fabrication without the need for multistep lithography,” he adds.
The researchers optimized the printing process by tuning the viscosity and evaporation behavior of the ink to improve both how the droplets were ejected and how they interacted with the substrate surface. According to Corzo, this optimization has provided a repeatable and commercially scalable process.
This bale of turtles is in fact a collection of inkjet-printed solar cells that show a conversion efficiency of 4.76%.
Baran’s team also fabricated high-efficiency turtle-shaped devices, demonstrating the potential for the process to be customized. “It is amazing that we can now fabricate solar cells with complex shapes at the push of a button, opening the door to a wide variety of applications,” Corzo says.
The researchers are currently developing fully printed organic solar cells and enhancing cell efficiency using higher-performance materials. They are also investigating ways to integrate the devices in modules and with other printed electronics for self-powered autonomous sensing.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.