Quantum Interferometry Demonstrated in Silicon at More Practical Temperatures
August 6, 2019 | RIKENEstimated reading time: 2 minutes
Using a silicon-based transistor similar to those found in everyday electronics, RIKEN researchers have produced a functional quantum ‘qubit’—the quantum equivalent of bits used in conventional computers—that operates above the extremely low temperatures typically needed to observe quantum interference effects.
Image Caption: Figure 1: By fabricating a simple three-terminal device that is similar to a general transistor using standard microfabrication techniques, RIKEN researchers could observe quantum interference effects of a single qubit while continuously varying the energy level of the qubit (inset).
The study breaks open the exploration of quantum interference to enable research using standard materials and techniques at more accessible temperatures.
Many highly sensitive measurement techniques are based on monitoring the interference of waves. The most well-known example is the detection of extremely weak gravitational waves generated by colliding neutron stars and black holes using the interference between two laser beams that are several kilometers long. Many scientists are working on extending this technique to the wave functions of quantum objects since this would permit much more sensitive sensing than is possible using classical waves.
A promising system for achieving such quantum interferometry is silicon because researchers can draw on the many decades of research and development that have gone into conventional silicon-based electronics and integrated circuits. In particular, spin qubits in silicon could be used for quantum interferometry, but semiconductor qubits typically need temperatures very close to absolute zero, which necessitates using bulky and expensive cryogenic equipment.
Now, Keiji Ono of the RIKEN Advanced Device Laboratory and his co-workers have raised the operating temperature of qubits in silicon to 1.6 kelvin. “This is in the ‘high temperature’ range, which might sound strange, but compared with the 0.1 kelvin temperatures usually required for semiconductor qubits, these high temperatures can be produced in a less expensive, smaller facility and in a short time,” comments Ono. “This is a major achievement and will reduce the hurdles for any research group trying to enter this area of research and development.”
The researchers fabricated a simple three-terminal device similar to a general transistor using standard microfabrication techniques, and were able to observe the quantum interference effects of the single qubit while continuously varying the energy level of the qubit (inset of Fig. 1).
“I wanted to use a silicon device as a universal basis for exploring ubiquitous, material-independent quantum effects,” explains Ono. “Furthermore, our device is not just a laboratory device made using silicon material, but a practical device that actually forms part of a large-scale integrated circuit.”
The results that the team obtained using the device agreed well with theory. “Our single qubit calculates the weighted average of two input variables using quantum interference,” says Ono. “We achieved almost perfect agreement between the experiments and calculations, confirming the ubiquitous nature of the observed quantum interference effect.”
Suggested Items
Ambiq Apollo510 Delivers 30x Power Efficiency Improvement to Unleash Endpoint AI
03/27/2024 | AmbiqAmbiq, a technology leader in exceptionally energy-efficient semiconductors for IoT devices, is introducing the new Apollo510, the first member of the Apollo5 SoC family, which is uniquely positioned to kickstart the age of truly ubiquitous, practical, and meaningful AI.
Commercial Demand Continues to Be the Main Driver of Personal Computing Device Shipments into the GCC Region
03/26/2024 | IDCThe Gulf Cooperation Council (GCC) personal computing device (PCD) market, which is made up of desktops, notebooks, and workstations, declined 4.0% year on year in 2023, with high inventory levels and reduced consumer spending the primary causes.
Absolute EMS Completes ISO 13485:2016 Recertification, Strengthening Commitment to Medical Device Quality Systems
03/25/2024 | Absolute EMS, Inc.Absolute EMS, Inc., an award-winning EMS provider of turnkey contract manufacturing services, proudly announces the successful completion of its ISO 13485:2016 audit, reaffirming its commitment to excellence in medical device manufacturing.
IMAPS Wrap-up: AI, Chiplets, and 3D Cube Architecture
03/22/2024 | Marcy LaRont, PCB007 MagazineThe International Microelectronics Assembly and Packaging Society, IMAPS, held its 20th Device Packaging Expo and Conference this past week in Fountain Hills, Arizona, followed immediately by a ‘Workshop on Advanced Packaging for Medical Electronics’ that continued through the remainder of Thursday. Fortunate to find myself in Texas earlier in the week, I made it for the last day of the IMAPS event and attended two excellent keynote presentations by AMD and Intel, respectively. Here are some highlights.
Global Shipments of Wearables Devices Saw Modest Growth in 2023 with Improved Demand Expected in 2024 and Beyond
03/20/2024 | IDCNew data from the International Data Corporation (IDC) Worldwide Quarterly Wearable Device Tracker shows that the wearable devices market declined 0.9% year over year in the fourth quarter of 2023 (4Q23).