I-Connect007 Editor’s Choice: Five Must-Reads for the Week
October 21, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
Where did the year go? I can’t believe we’re planning our January and February issues now. It was 84 degrees most of last week in Atlanta, and now it’s 31. I guess I should take my Hawaiian shirts out of rotation!
This week we have quite a variety of articles for you. It’s officially show time and the industry is back in business in a major way. We have some news coming out of last week’s advanced packaging event in Washington, D.C., and an article about navigating SMTA International, which opens on Halloween this year in Minneapolis.
We have a great column on avoiding EMI with good routing strategies, and an article on electrically conductive inks. To top it off, I-Connect007 has published a new book, written by Matt Stevenson of Sunstone Circuits, that posits a new “design for”: Designing for Reality. If you’re a designer, isn’t designing for reality what it’s all about?
See you next time.
Sunstone and I-007eBooks Launch Book on Designing for Reality
Published October 20
There are probably a dozen “design fors” floating around now, with DFM being ubiquitous at this point. But this new I-Connect007 book cuts right to the chase with a new acronym: The Printed Circuit Designer’s Guide to… Designing for Reality. Sunstone’s Matt Stevenson takes designers through the reality of the PCB fab process. Matt basically says, “Here’s what works, and here’s what doesn’t. Let’s go.” Check it out.
IPC Symposium: U.S. Must Address Critical Gaps in Advanced Packaging Needs
Published October 12
As fictional NASCAR driver Ricky Bobby so eloquently put it, “If you ain’t first, you’re last.” When it comes to advanced substrate packaging, North America is definitely not in first place. As Jan Vardaman explains, last week’s IPC Advanced Packaging Symposium in Washington, D.C., represented a call to action. Speakers from across the electronics industry and various branches of the U.S. government addressed this gap in the supply chain which threatens our ability to develop the most cutting-edge fighter planes and weaponry. We’ll keep a watch on this situation.
Time to Go ‘Exploring’ at SMTA International
Published October 19
If you’re getting ready for SMTA International, don’t miss this. Editor Michelle Te has a handy-dandy article that covers how to use the SMTAI 2022 Passport. Ambassador Exhibitors on the show floor will discuss their companies’ technology and stamp your passport, and the most active Explorers and most popular Ambassadors can win various prizes. Grab your pith helmet and start exploring.
Market and Tech Convergence: Electrically Conductive Inks
Published October 17
In this article, Stan Farnsworth of NovaCentrix discusses the development of electrically conductive inks. Now in use in everything from smartphones and medical devices to cars and space suits, these inks can be configured by the OEM and applied in a variety of ways. Stan explains what all this means to designers and fabricators on the cutting edge.
Beyond Design: Routing Strategies to Minimize Radiation
Published October 19
If you’re a designer or design engineer wrestling with EMI issues, this Barry Olney column is just for you. Barry explains how good routing practices can save up to 10 dB of substrate radiation. He addresses things like fanout, mark-to-space ratios, and flight time for microstrip vs. stripline. In case this topic isn’t your strongest suit, Barry summarizes your best way forward. Don’t miss it.
Suggested Items
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/12/2024 | Nolan Johnson, I-Connect007As we publish this week’s most-read news, the I-Connect007 team is wending its way home from an eventful and productive week at IPC APEX EXPO in Anaheim, California. We’ve posted a variety of dispatches from the show this week, released 73 realtimewith.com video interviews (and counting), and also gathered the content and updates you’ll be looking for in the upcoming issue of Show & Tell… IPC APEX EXPO 2024.
Material Insight: The Importance of Standards for the Chip Packaging Industry
04/12/2024 | Dr. Preeya Kuray -- Column: Material InsightI had the great pleasure of recently attending the National Institute of Standards and Technology’s (NIST) CHIPS R&D Chiplets Interfaces Technical Standards Workshop. The purpose was to bring together technical experts across industry and academia to deliberate one of the most pressing technological matters of 2024: chip packaging standards.
What’s New in Design Education at IPC APEX EXPO?
04/11/2024 | Kelly Allen, IPC Training ManagerKelly (Kel) Allen shares her thoughts on the educational offerings at IPC APEX EXPO and beyond. In this interview, she discusses some of the newest classes taking place during the conference in Anaheim, covering everything from design, fab, and assembly through mil/aero, test, and supply chain issues.