-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
A Focus on Ultra HDI
June 5, 2023 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
John Johnson is relatively new to American Standard Circuits, but definitely not new to the technology. In fact, he was hired to focus on business development for ultra-high-density interconnects. John explains more about the process and where it’s taking ASC.
John, how do you define ultra-high density?
I define it as ultra-fine lines, small microvias, sub-4-mils; layer count can vary depending on what the needs are. It can be stacked microvias, multiple stacks up to four, maybe a little bit greater than four—any layer type of technologies.
What's the ASC technology roadmap to UHDI? What do you have and what do you still need? What are the customers asking for?
American Standard became a licensee of Averatek's technology—which is the A-SAP™ process—about a year and a half ago. During that time, ASC has been getting up to speed and running the technology, looking at business, and bringing in commercial opportunities.
Before joining American Standard, I worked for Averatek and had multiple years of experience with the technology; I spent time working on installations at a variety of printed circuit board manufacturing sites. When I came here, it was natural to get that process to the next level. We're now building a lot of test vehicles, prototypes, commercial orders that are quickturns with smaller requirements.
Now we are looking at adding ultra-fine vias. We've done some copper filling on 4-mil diameter through-holes as well.
ASC has been using outside sources for laser. But as we get into this, it's beneficial to have our own laser in-house, so we've recently put in a purchase order to get a brand-new laser drill. We have quite a bit of capital acquisition right now. We've refreshed our strip/etch/strip line (SES), and our inner layer etch/strip line with vacuum etching technology.
Of all these changes, which ones are directly related to UHDI? An additive process is critical to get those sorts of dimensions in a laser drill. Which pieces are necessary to support getting to UHDI?
In a sense, they all are necessary to getting there. We have been getting into other aspects where you have embedded capacitors and resistors. We’ve been working quite closely with the folks at Quantic in terms of the Ticer materials and the OhmegaPly® materials as well.
It all must come together because ultra HDI needs many different aspects. The Averatek process that we're using as our vehicle to get to ultra-fine lines is the cornerstone. But you can't do fine lines without ultra-fine vias. We've added copper filling ability for our microvias and we've been upgrading our plating lines. We're moving to insoluble anode technology with special brighteners and levelers to control the plating distribution better from surface to the via; there are many pieces that make ultra HDI.
To read the rest of this interview, which appeared in the May 2023 issue of PCB007 Magazine, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.