-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Slash Sheets: Don’t Fall Into the Trap
June 8, 2023 | Geoffrey Hazelett, Technical SalesEstimated reading time: 2 minutes
Slash sheets can be confusing, and this is a big topic, so let’s start big and drill down from there.
Here’s the big picture regarding slash sheet references: They were designed to provide handy groupings of PCB materials (laminates, polyimides, etc.) that go into a stackup. These groupings are designed around mechanical characteristics to provide insight for PCB fabricators to identify similar laminates with similar properties.
These documents were not designed to be used by PCB designers to help select the correct material for their job. For high-speed designers in particular, these group references can be a trap. While two material families may have similar mechanical processing characteristics for fabricators, the materials can have wildly dissimilar electrical characteristics. Dielectric constant (Dk), dissipation factor (Df), copper roughness values, and glass weave styles (106/1080/3313, etc.) are all significant for signal integrity and are not appropriately distinguished within slash sheets.
For example, due to this ambiguity of electrically significant values, two electrically dissimilar performing materials could be substituted for one another. The two materials may have similar processing temperatures and roughly similar characteristics; to savvy PCB designers with an eye for signal integrity, slash sheets fall short.
For example, IPC-4101/126 has a maximum Dk value of 5.4, and a Df of 0.035. To use Isola materials as an example, this lumps 185HR, 370HR, IS550H, IS415, FR408HR, and I-Speed all together. So, if a designer needed high-frequency performance with something like I-Speed, but allowed a substitution with /126, their fabricator would likely swap the material to something else. That other material could likely be a 185HR or 370HR, which have significantly differing Dk/Df values as well as differing glass weave types.
A designer who wants to control the materials in their stackup is often pressed to communicate specific acceptable alternative supplier laminates, such as “Panasonic Megtron 6 (or Isola I-Speed),” to their fabricator.
To use shoes as an analogy: Shoes generally all have a sole, laces, breathable top, etc. A slash sheet reference would help identify “shoes,” but doesn’t help identify “running shoes” vs. "hiking boots." Nike and Adidas both make running shoes, so a designer could use “/shoes” (slash sheet reference), but they may be in trouble if they are running a marathon and want “Nike or Adidas running shoes.” A limitation of the slash sheets is that there are significant differences between the brands and the types of shoes, and unfortunately they could all be lumped together in the same slash sheet for “shoes.”
A designer should clearly communicate with the fabricator regarding the desired glass weave, resin type, etc., going into their board if they wish to ensure their signal integrity characteristics will be met. Don’t take unnecessary short cuts when a few more words can save a world of headache.
Geoffrey Hazelett has a bachelor of science degree in electrical engineering, and was vice president of sales at Polar Instruments for several years. He is currently home with his new baby daughter, Sage.
This article originally appeared in the May 2023 issue of Design007 Magazine.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.