A PCB Design Potpourri


Reading time ( words)

In this column, I will be revisiting topics covered in some of my older columns and fleshing them out with new, updated information. In this job, I truly learn something every day, and I’m happy to share a few notable nuggets with you.

The Quote Process

Ultimately, whether it’s a quick-turn or standard lead-time job, customers would like to see all quotes back within a couple of hours, not a couple of days. Additionally, they want to see accurate quotes that take into account all additional processes. It’s never good when, once quoted, the fabricator comes back with additional costs for unforeseen processes. Again, this is why it is important to get a manufacturing review done if anything outside the norm is required on the drawing or quote. This includes a proper review of impedances to ensure that materials are available and the impedances work without requiring large variances in dielectric or line sizes, buy-offs for any deviations of material type or copper weights, etc.

Beyond the quote process, be sure that your fabricator is capable of all the processes necessary to ensure the board is built as expected. You want your board shop to be IPC-6012 Class 3 capable and ISO certified, and perhaps ITAR as well. Even if you can’t visit the shop for a physical qualification, send them a job to quote and see how they respond. A good fabricator will be diligent and get back to you within a few hours after completing a preliminary examination of the files, impedance calculations and proposed stackup if the board is impedance/dielectrically controlled. They should also be able to let you know right away if the job does not meet their process minimums and can’t be built. If deviations are allowed, a good fabricator will also have an alternative for many situations, such as a deviation for material type, starting copper weight, dielectrics or line sizes to be able to produce the job.

Read the full column here.


Editor's Note: This column originally appeared in the July 2013 issue of The PCB Design Magazine.

Share


Suggested Items

Institute of Circuit Technology Hayling Island Seminar

10/10/2018 | Pete Starkey, I-Connect007
After an extreme summer heat wave had left trees dehydrated and struggling to morph into their customary display of reds and golds, the leaves were brown and brittle as the great and good of the UK printed circuit board industry crossed the bridge from the mainland of the south coast of England to Hayling Island for the autumn seminar of the Institute of Circuit Technology on September 20, 2018.

Chuck Bauer Discusses the Future of Packaging

09/05/2018 | I-Connect007 Editorial Team
When we decided to cover the future of PCB packaging, we knew we would have to interview Charles Bauer, Ph.D., owner of TechLead Corporation. Chuck recently spoke with Happy Holden, Andy Shaughnessy and Barry Matties about current trends in packaging, the need for product designers and manufacturers to communicate, and why no matter how cool the technology is, cost is still king.

Excerpt: The Printed Circuit Designer’s Guide to…Flex and Rigid-Flex Fundamentals

06/25/2018 | Dave Lackey and Anaya Vardya, American Standard Circuits
The design process is arguably the most important part of the flex circuit procurement process. The decisions made in the design process will have a lasting impact, for better or worse, throughout the manufacturing cycle. In advance of providing important details about the actual construction of the flex circuit, it is of value to provide some sort of understanding of the expected use environment for the finished product.



Copyright © 2018 I-Connect007. All rights reserved.