The Chemical Connection: Wet Process Start-up Considerations

Are you (or your company) considering starting your own PCB fabrication process? After the most recent IPC APEX EXPO, maybe you’ve made connections to help you with your start-up, but do you have a solid game plan? If you are new to managing a PCB shop, the first thing to know is that wet processing is essential in making PCBs. Wet processing steps, such as cleaning, developing, etching, and stripping, are among the many steps in the PCB fabrication process that require thorough planning. When you are just starting to get involved in this industry, keeping track of all this can feel overwhelming. If you fit in this category, it’s best to start with the basics and work your way up. Here are a few considerations and base essentials to aid you in starting up the wet processes for your new facility.

Scale of Production
Before you start planning out how you want your PCB shop to function, you will need to lay out your goals. For instance, it’s important to know the type of circuit boards you plan to make, as well as how many you want to make and how quickly you want to produce them. Knowing this information is vital because it will drastically shape your manufacturing process. Depending on your products, you may have to utilize different photoresists and wet processing chemicals (i.e., different cleaning, developing, etching, and stripping solutions).

In addition, you need to know the scale of your production so you can ensure that you get the suitable equipment for your level of manufacturing. For example, if you are planning to run a facility with a large output of panels per day, a multi-chambered etch machine may be something to consider (Figure 1). This is because the longer the etch chamber, the faster you can run the conveyor speed while maintaining the same processing time. This increased conveyor speed with a larger etch chamber means that more panels can be inside the etch chamber at the same time. Keep in mind that a larger machine also means that it will take up more floor space; the trade-off for increasing production is committing to a capital investment and sacrificing some space.


When you are planning to start a PCB shop, you need to consider not only what equipment you’ll need, but also the basic utilities required and how those will be connected. The primary utilities/base necessities are electricity, water, and ventilation. Typically, utilities run 15–20% of equipment cost. Although these utilities are a necessity for any manufacturing facility, some situations may need additional considerations. For instance, when it comes to your electrical needs, not only do you have to ensure you get the power you need to run the equipment, but you need to consider where electrical cabinets should be located. If you are utilizing an alkaline etcher, you’ll need something to help regulate the airflow through the machine to ensure optimal etching.

Available Workspace
As I mentioned, the floor space requirements of your equipment should be a major consideration when planning your facility. When deciding on the equipment you need to meet production goals, you must find a balance between available floor space and how to meet your production needs. When working on the layout of your facility, keep in mind that you’ll need to reserve additional space to ensure that people can easily run and maintain your equipment. Poor manufacturing floor design can create inconvenient situations for operation and maintenance, which can negatively impact the longevity and efficiency of your equipment. Having an awareness of space is vital when planning your process because you need a layout that will get your equipment inside the facility and leave enough space for it to be operated efficiently.

Process Locations
When planning out your wet process, you may want to consider its location relative to other equipment. This is because corrosion is a given with etching equipment. Although the equipment safely contains the etching chemicals, the process tends to create a corrosive environment; anything metal in the area that lacks some form of corrosion resistance will experience corrosion over time. Etching equipment is often kept in its own room to account for this phenomenon. Therefore, if you have an expensive machine testing your printed circuit boards, you do not want it in the same room as your etching machine.

Waste Management
Producing PCBs generates many different forms of waste. For wet processing, contaminated rinse water and excess etchant are common waste streams. As you process a panel through one of the wet processes, it’s normal to rinse it before it goes to the downstream processes. These rinse waters become contaminated with wet processing chemicals and need to be treated before disposal. This is something that you can do in-house, but how you do it may depend on the wastewater regulations in your area. You may be required to precipitate any heavy metals out of the water to make it meet your discharge permit limits. In this case, the precipitated metal sludge is another waste steam that will need to be handled. Typically, this sludge is filtered off from the water, dried, drummed, and sent off to a waste treatment facility.

Excess etchant is another waste product you need to plan for. As you etch your PCBs and make chemistry adjustments, you will accumulate etchant in your etching machine over time. This excess etchant needs to be pumped out before the level gets too high in your etcher bath. Since the excess etchant usually doesn’t meet quality requirements for reuse, and because it is concentrated, it is common practice to pump the excess etchant into a barrel that will get shipped to a waste treatment facility.

If you are looking for a good place to start planning your PCB fabrication process, I hope the information I’ve provided here gives you a better idea of what to expect. Knowing about these matters and preparing for them ahead of time can make planning your wet process—and your job—much easier.

This column originally appeared in the February 2023 issue of PCB007 Magazine.



The Chemical Connection: Wet Process Start-up Considerations


Are you considering starting your own PCB fabrication process? Do you have a solid game plan? If you are new to managing a PCB shop, the first thing to know is that wet processing is essential in making PCBs. Wet processing steps, such as cleaning, developing, etching, and stripping, are among the many steps in the PCB fabrication process that require thorough planning. When you are just starting to get involved in this industry, keeping track of all this can feel overwhelming. Here are a few considerations and base essentials to aid you in starting up the wet processes for your new facility.

View Story

The Chemical Connection: The Subtractive Vision


The November issue of PCB007 included a fair amount of discussion on the growing need for ultra-high density interconnects (UHDI). UHDI is an area replete with manufacturing challenges due not only to the feature sizes this technology requires (< 50 micron or < 2 mils), but also the lack of familiarity U.S. manufacturers have with this technology. In an interview with Calumet’s Todd Brassard and Meredith LaBeau, they stated that the U.S. is roughly 30 years behind the curve in manufacturing UHDI, which is likely the result of companies offshoring UHDI manufacturing for many years. How can we catch back up?

View Story

The Chemical Connection: Basics of Cupric Chloride Etchant


Cupric chloride (CuCl2) is an etchant that has capabilities that make it a great application in PCB manufacturing. Maintaining CuCl2 is relatively forgiving in comparison to alkaline etchant because there are only a handful of parameters you need to monitor. If CuCl2 seems like it would be an appealing etchant to use for your PCB etch process, here are some basic parameters that are key to understanding how to maintain it.

View Story


The Chemical Connection: Cupric Chloride Regeneration Options


Cupric chloride (CuCl2), if you recall my column “Etchants of the Industry: Cupric vs. Alkaline,” is the second most used etchant in PCB etching next to alkaline etchant. It holds many benefits such as simple maintenance, easy wastewater treatment, reduced cost of etching, and efficient regeneration. Many times, I have discussed how critical it is to implement regeneration because it allows you to maintain a consistent etch quality and reduces the cost of etching. What makes cupric’s etch regeneration simple is that it is a matter of what you choose to use.

View Story

The Chemical Connection: Closing the Innovation Gap


In Nolan Johnson’s September 2022 column, “New Era Manufacturing,” he referred to the carriage whip manufacturing businesses that met their fate by failing to adapt while other carriage businesses with more robust product applications remained standing. He said this relates to our industry in the sense that the needs of our world are evolving, that the wants and needs of PCB fabricators and their customers are bound to change. There will always be a demand for PCBs, since it is the foundation of modern technology, but market challenges are inevitable. PCB fabricators are dealing with increasing material and labor costs, all while major quick-turn-around jobs are declining. The questions we must ask are: Where do we go from here? How can PCB fabricators overcome these challenges and get an edge in the market? How can we best adapt?

View Story

The Chemical Connection: How to Automate Your Wet Processes


Considering automating your PCB fabrication line? If you are, then you may have concerns about what it takes to implement new automation technology. The good news is that setting up your processing lines for automation is simpler than you may think. Whether you are obtaining new equipment, or you want to automate a machine that you’ve been working with for years, automating it can be as simple as tightening a few bolts and wiring a couple connections. Automating your process lines are now easier than ever thanks to low-cost, user configurable robot arms. Since most of the processes from beginning to the end of PCB manufacturing are already automated (at least in wet processing), the only areas left open for automation are the loading and unloading sections.

View Story

The Chemical Connection: The Etch Factor


One of the biggest obstacles that PCB manufacturers face is etch factor. Etch factor is the ratio of downward etch to sideways etch. Etch factor poses challenges to PCB fabricators because it limits PCB design. It can determine how fine of a line you can etch, and it can even affect how close together you can have features. For instance, if you wanted to use cupric chloride (etch factor of 3:1) to etch a fine line (3 mils or less), you might not be capable of doing that with panels of thicker copper layers. If you try to do that, you will likely receive inconsistent results throughout your panels. Inconsistencies will arise because there is a point where the sideways etch will affect metal underneath the photoresist and etch it away.

View Story

The Chemical Connection: Don't Sludge-Out—A Guide for Alkaline Etching


In my last column, I compared cupric chloride and alkaline cupric chloride, mentioning that alkaline etchant is the most used etchant for PCB fabrication. It is used because it provides a high etch rate, improved etch factor, and compatibility with metallic resists. Although it has some great benefits, it has the drawback of being difficult to control. The etching chemistry requires a delicate balance, and the parameters it needs to stay within are relatively tight. Not only are the margins for error small, but falling outside these parameters may have consequences.

View Story

The Chemical Connection: Etchants of the Industry—Cupric vs. Alkaline


Chemical etching is a vital process for manufacturing PCBs. It is one of the most complex chemical processes next to plating. This is because there are many different variables that can affect your product and how efficiently it is produced. Although it is complex, etching of copper can be narrowed down to a handful of etchants that PCB manufacturers widely use. By far, the most common etchants are cupric chloride and alkaline cupric chloride, commonly referred to as “ammoniacal alkaline etchant.” There are other etchants for copper, such as ferric chloride, sodium persulfate, and alkaline ammonia sulfate, but they are not commonly used for PCB manufacturing and are often only used in “special cases.” I may touch on those other etchants a bit more in a future column, but this one will focus on cupric and alkaline.

View Story

The Chemical Connection: How Industry 4.0 Shapes PCB Wet Processes


Earlier this year, I had the opportunity to attend IPC EXPO 2022 where I was able to network with many great people in the electronics industry and see how other businesses are connected to the work we do at Chemcut. Although that might have been my main takeaway, there was another trend that I couldn’t ignore: the fourth generation of the industrial revolution is alive and well in the industry. After being shown the many different technologies that can be leveraged to boost automation, I couldn’t help but consider how they may impact the wet processing side of PCB manufacturing. I also wonder about other forms of automation we may soon see and what those developments could mean for the industry.

View Story

The Chemical Connection: The Case for Preventive Maintenance


Preventive maintenance (PM) is a routine maintenance performed to ensure equipment runs efficiently and won’t experience problems anytime soon. This routine maintenance can become highly important when you are running a business that relies heavily on equipment for production. Printed circuit board (PCB) shops are no exception to this because their production is dependent on many different complex machines working together. Although PM is critical, a large portion of PCB shops don’t have a PM program. Far too often, manufacturers will wait until a machine starts experiencing problems before they act.

View Story

The Chemical Connection: Etch Uniformity and the Puddle Problem


Printed circuit board manufacturers who utilize wet processes have always strived to receive a uniform etch across their panels. Although it is one of the most common matters these manufacturers tackle, it is perhaps the least understood. This is for a few reasons, one of them being that there doesn’t seem to be an agreed upon terminology within PCB manufacturing.

View Story
Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.