An Overview of Rigid-flex Design
September 13, 2023 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
For this month’s issue on rigid-flex design, we spoke with instructor Kris Moyer, who teaches the IPC class “PCB Design for Flex and Rigid-Flex Boards.” In this wide-ranging interview, Kris breaks down the hurdles facing rigid-flex designers and offers a variety of solutions for rigid board designers taking on their first rigid-flex circuits. He also provides a few horror stories to illustrate what happens if you don’t follow sound design practices, rules, and standards. And, as Kris points out, “Your fabricator is your friend.”
Andy Shaughnessy: What are you trying to get across to the students when you’re teaching rigid-flex design? What are the biggest challenges?
Kris Moyer: One of the biggest concepts I want to get across to students is that there are a lot of untapped, unforeseen, intangible benefits to rigid-flex, both from a design point of view and a total cost of ownership point of view. Rigid boards are usually connected with wire harnesses or cables, and we know that wire harnesses and cables are the largest point of failure in the system. Wires and cables tend to break, especially at the solder joints or pins. If we can remove all those harnesses and integrate all of that into the structure of the board, we can vastly reduce the failure rate of our designs.
If you choose to go rigid-flex, there is an initial cost expenditure: added processes, time, complexity, and all of that. But let's say I have a design with three circuit boards that would need two cable harnesses, one from board one to board two, and one from board two to board three. That's a grand total of five different item numbers I would need for each board. I would have three drawing numbers: a number for the schematic, a number for the board, and a number for the assembly. For three boards, that's nine drawings I must maintain, and then another two drawings per cable, and let's assume two cables. That's a total of 13 separate drawings and part numbers I have to maintain in my system.
To read this entire conversation, which appeared in the September 2023 issue of Design007 Magazine, click here.
Suggested Items
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.