The Fundamentals of Improving PCB Thermal Design


Reading time ( words)

 

Continental's automobile engineers have many years of experience building critical parts and systems for automobiles, from the chassis and safety systems to the powertrain, interior control systems, and tires. Much has changed in the past decade, and electronic technology has become an important aspect of what the company supplies to OEM and other manufacturers worldwide. Electronics are doing more now than ever to provide safer cars, cleaner power, more mobility, and smarter driving.

Making sure that automotive electronics are reliable, safe, and properly designed begins at the component level. Heat must be addressed early in the design process for these goals to be achieved. The most important thermal resistance for heat, outside the IC package, is the PCB. Continental engineers use 3D computational fluid dynamics (CFD) to simulate and test a PCB’s thermal design. Modeling the main heat flow paths in detail is critical to ensure that generated heat in the component flows out to the ambient, either through convection, conduction, or radiation. Knowing the thermal junction resistance allows optimizing a design for more efficient and less costly heatsinks, materials, and ICs.

When building a model to use in simulation, different methods can be used to represent chip packages and PCBs. Chip packages are typically defined as four types. The simple cuboid is a lumped component with some material properties and a heat source applied to it. The 2-resistor model doesn’t include any thermal capacitance and is therefore not suitable for transient analysis of component temperatures. The Delphi model is comprised of several thermal resistances and capacitances and thus is more accurate and suitable for transient simulations. Finally, the detailed model is modeled explicitly and is the most accurate model; however, it also increases the simulation time and requirements for computing resources.

For the PCB, four detailing levels from simple to complex also are used in simulation: lumped approximation, individual layers’ representation, layers modeled with “patches,” and copper tracks and areas modeled in detail.

To read this entire article, which appeared in the September 2016 issue of The PCB Design Magazine, click here.

Share

Print


Suggested Items

New Book From Isola Highlights Importance of Material Selection

01/14/2022 | I-Connect007 Editorial Team
In "The Printed Circuit Designer’s Guide to... High Performance Materials," the latest release from I-007eBooks, readers will learn how to overcome challenges associated with choosing the right material for their specific application. Author Michael Gay of Isola provides a clearer picture of what to know when determining which material is the most desirable for which products. PCB materials and DFM expert Mark Thompson says, “I love this book, particularly the sections on the effects of the glass weave, the history of laminate, and the difference between Dk and effective Dk."

Living in a Material World: High-Speed Design Strategies

01/13/2022 | I-Connect007 Editorial Team
Any discussion about high-speed PCB design techniques would be incomplete without considering the properties and requirements of the materials. Your material selection drives much of your design strategy when you’re operating at 28 gigabits per second or faster. We recently spoke with high-speed design expert Lee Ritchey of Speeding Edge, and electronic materials veteran Tarun Amla of Avishtech and Thintronics, about the relationship between advanced PCB materials and high-speed design techniques. They discuss the challenges facing designers and engineers working with materials at speeds that were considered unreachable not long ago, and what designers need to know about material selection as board speeds continue rising toward the stratosphere.

RealTime with... American Standard Circuits: Thermal Management

12/16/2021 | Pete Starkey, I-Connect007
In the third of a series of three RealTime with... interviews, I-Connect007 managing editor Nolan Johnson received knowledgeable and informative answers from Anaya Vardya, John Bushie, and Dave Lackey of American Standard Circuits to his questions on the topic of thermal management. Anaya Vardya began by clarifying the terminology, describing thermal conductivity as a material property defining how quickly heat was transmitted through a piece of that material, whereas thermal management was about analysing the entire system, trying to understand how much heat was being generated, and using appropriate techniques to dissipate that heat as efficiently as possible.



Copyright © 2022 I-Connect007. All rights reserved.