-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
3DEM Modeling: Influence of Metal Plating on PCB Channel Loss and Impedance
March 21, 2019 | Chang Fei Yee, Keysight TechnologiesEstimated reading time: 1 minute
This article briefly introduces different types of metal plating commonly used in PCB fabrication. Subsequently, the influence of metal plating on PCB channel loss (i.e., insertion loss or S21) and impedance (i.e., time domain reflectometry or TDR) is studied with 3DEM modeling using Keysight EMPro.
Introduction
Metal plating that serves as a protective layer is applied on top of the copper traces during PCB fabrication, thus alleviating the oxidation process of the copper. Common finishes include immersion silver (IAg), electroless nickel immersion gold (ENIG), etc. With immersion silver, nearly pure silver (i.e., ~0.02 mils in thickness) is coated over the copper traces on a PCB. Meanwhile, with ENIG, nickel (i.e., ~0.2 mils in thickness) is deposited on the copper trace followed by a coating of gold (i.e., ~0.01 mils in thickness) on top. Nickel serves as a barrier layer to prevent the migration of gold into the base copper.
However, metal plating comes with disadvantages. On a PCB, the current of the signal tends to propagate more closely to the surface of the trace when the frequency of the signal becomes higher. Skin depth is the parameter that determines how extensive the current of signal travels with reference to the surface of the transmission channel. The relationship between skin depth and signal frequency is governed by Equation 1. For instance, at frequency 10 GHz, skin depth becomes 0.026 mils.
Equations 2, 3, and 4 indicate that attenuation of the signal is inversely proportional to the metal conductivity. Once metal with lower conductivity is coated over a copper trace, the signal experiences a larger amount of attenuation. For instance, skin depth becomes 0.026 mils at a signal frequency of 10 GHz. If ENIG plating (i.e., base copper 1.09 mils, nickel 0.2 mils in the mid layer, and gold 0.01 mils on top) is applied, the high-frequency signal will propagate on the gold and nickel-plated layers. This signal will encounter a larger magnitude of attenuation due to the lower conductivity of nickel.
To read this entire article, which appeared in the February 2019 issue of Design007 Magazine, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.