-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Mentor’s EDA Perspective on Managing Design Rules
May 30, 2019 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 3 minutes
I recently spoke with Dave Wiens, product manager, and Mike Santarini, EDA content director of corporate marketing, both of Mentor, a Siemens business, about design rules and constraints, and what their customers want regarding design rules. They explained how EDA companies like Mentor help designers constrain for performance while avoiding over-constraining and increasing the cost of the board and also being manufacturing-aware.
Andy Shaughnessy: Can you start by telling us about what your customers want in their design rules capabilities. What do you try to provide them as far as design rules?
Dave Wiens: Customers have to take all of the design constraints and manage what might be conflicts between those and determine what the tradeoffs are to optimize the product. From a tool perspective, we try to enable whoever is defining those constraints to do it as easily as possible within a common environment, and then pass those on to whoever is going to utilize them. Often, it’s the layout designer that has to implement the constraints. They’re dealing with the physical embodiment of the product, but there are constraints on the schematic stage as well. We help them automate the definition of those constraints, simplify the entry, but it’s not enough to define constraints. You also have to validate those constraints.
You must try to simplify the way it’s done so that somebody can look at a design and say that it passed. It’s about simplifying constraint definition as well as adherence to the constraints and verification. So, how does the designer do the design and try to adhere to constraints? Ensure that the full design verification and constraints were met and that the product is going to work. Again, the problem is constraints are coming from multiple people, for instance different requirements on performance might being at odds with each other.
Shaughnessy: One of the designers I talked to said that the problem is that no one person can remember all of these things simultaneously.
Wiens: Right. And in the old “Wild West” of design, there wasn’t a constraint editor. Then, you got constraints and had an engineer talking over your shoulder, saying, “When you route these two traces, keep them this far apart.” It was all digitized, and you had to use old-fashioned ways to determine whether they were far enough apart. There was no such thing as a digital constraint or something to adhere to.
The idea of becoming aware of all of them is a big thing, so from an EDA perspective, we try to automate these things. We help gather all of those constraints in one place. There are still things that can be done to improve on that. It’s about having a streamlined way so that you can pass constraints from whoever defined them. If it came from the engineer at the front or the manufacturing NPI engineer at the back, the process helps define those and pass them to the person who has to implement them.
Shaughnessy: Many designers say they don’t even know who is going to be fabricating their board or prototype, much less production. How do you figure all of that in the design rules? Do you have to re-enter it each time?
Wiens: In most tools you do. Not just every job, but you want to be able to design for multiple manufacturers, for instance. And you definitely want to be able to retarget, and that’s one of the things that we’ve been able to do thanks to our Valor technology. The majority of manufacturers out there, around 80%, use Valor for their verification tool. If they’re using Valor, they can pass the designer those rule decks. Then, the designer can retarget without having to reenter a bunch of constraints. They can say, “I want to go after this manufacturer instead of this one,” and do it with a rule deck that the majority of manufacturers use.
To read this entire interview, which appeared in the May 2019 issue of Design007 Magazine, click here.
Suggested Items
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Siemens Delivers New Solido IP Validation Suite
05/07/2024 | SiemensSiemens Digital Industries Software introduced Solido™ IP Validation Suite software, a comprehensive, automated signoff solution for quality assurance across all design intellectual property (IP) types, including standard cells, memories and IP blocks.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/07/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Happy’s Tech Talk #28: The Power Mesh Architecture for PCBs
05/07/2024 | Happy Holden -- Column: Happy’s Tech TalkA significant decrease in HDI substrate production cost can be achieved by reducing the number of substrate layers from conventional through-hole multilayers and microvia multilayers of eight, 10, 12 (and more), down to four. Besides reducing direct processing steps, yield will increase as defect producing operations are eliminated.