-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
ILFA Invests in the Expansion of its PCB Lamination Capacities
September 27, 2022 | ILFAEstimated reading time: 1 minute
During the LAUFFER Technology Days, ILFA Managing Director Thomas Michels and LAUFFER Managing Director Christof Lauffer announce a close cooperation, which is sealed with a joint letter of intent. The new investment project, which is part of ILFA's modernisation offensive, is aimed at a highly automated lamination centre that will sustainably support PCB production at ILFA's Hanover site.
With the planned new investment from LAUFFER, ILFA GmbH will triple its production capacity in the lamination area. At a cost of more than EUR 1.3 million, the laminating centre would be the largest single investment to date in the company's 43-year history. The modernisation offensive at ILFA provides for total investments in the higher double-digit million range. In addition to increased automation, numerous new acquisitions are currently being made in the areas of OFT (surface technology) and FLT (photo and lacquer technology). These include a new DES line, solder resist developers, micro etching and a new plasma system.
Thomas Michels explains: "On the one hand, we want to grow technologically, but on the other hand, we also want to significantly expand our production capacities. In this way, we will consolidate our position in the market and further establish ourselves in the field of rigid-flex printed circuit boards, RF and power technology as well as in the process-safe processing of the finest structures. We are pleased to have gained LAUFFER as a partner who will support us with its many years of expertise."
The projected RMV 125/6 LAUFFER lamination centre is characterised above all by a high degree of automation and very high energy efficiency during the lamination process. Thanks to the unique design concept with large storage capacities, which was specially adapted to ILFA's requirements, the laminating system can be operated fully automatically even during night shifts or so-called ghost shifts. Another innovation is the operation of the system with newly designed heat accumulators for heat recovery during press operation. These enable energy saving effects of up to 30% depending on the operating mode of the entire system. "We are pleased to be able to realise this project together with ILFA. We see this as an important signal for the European PCB industry and especially for the domestic market in Germany," says Christof Lauffer about the jointly planned project.
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.