-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
Article Highlights
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Printed Electronics in Perspective
August 27, 2014 | Joe Fjelstad, Verdant ElectronicsEstimated reading time: 1 minute
Printed electronics have garnered a significant amount of press coverage over the last several years. What appears to have precipitated the explosion of interest in the middle of the last decade was a report that suggested that printed electronics would dominate electronic production by the mid-2020s with an annual market of over $300 billion. $300 billion is a big number and it not surprisingly captured a lot of attention. Since that announcement there has been a significant paring down of the market expectations to a number closer to one quarter the one projected earlier. It is, one can perhaps safely assume, an acknowledgement of the persistence of incumbent technologies. It seems clear to many knowledgeable observers that the potential of printed electronics was much more modest than early projections, but as Yogi Berra observed and has been often quoted, “Predictions are hard to make, especially about the future.”
The hyperbole surrounding the reports released in 2007 was met with some bemusement by those such as this writer, who having been first been involved in what would be called direct write printed electronics startup (using today’s broader definition) in 1990 had a different perception of the technology’s “newness.” Moreover, as one seeking to give credit where credit is due, it should be evident (if one puts in a bit of effort and does a little digging) that printed electronics is a technology that is arguably more than six decades old, thus predating my earlier company’s efforts by some 35 years.
The very first printed electronic circuits were called printed circuits because they were exactly that…printed, using conductive and resistive inks. Moreover, Xerox’s technology (then called the Haloid-Xerox Company) was applied to printing etch-resistant films for circuit production in the mid-1950s and more than 45 years ago, there was demonstration of a printed transistor in roll-to-roll fashion by Westinghouse.
Read the full article here.
Editor's Note: This article originally appeared in the August 2014 issue of SMT Magazine.
Suggested Items
Janene Stinson, Boeing, Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.
Zentech’s Board of Directors Announces the Return of Matt Turpin as President and CEO
04/22/2024 | Zentech ManufacturingTurpin draws upon over 35 years of experience in the electronics industry and has an 18-year history with Zentech. He previously served as President and CEO from 2006 to 2019 after which time he has remained active in the EMS industry as an advisor to Zentech and other industry organizations.
IDTechEx Report Unveils 3D Electronics Status and Opportunities
04/22/2024 | PRNewswire3D electronics is an emerging manufacturing approach that enables electronics to be integrated within or onto the surface of objects. 3D electronic manufacturing techniques empower new features, including mass customizability, greater integration, and improved sustainability in the electronics industry.
IDTechEx Examines the Opportunities for Wearables in Digital Health
04/19/2024 | IDTechExIDTechEx’s report, “Digital Health and Artificial Intelligence 2024-2034: Trends, Opportunities, and Outlook”, covers this ongoing trend in the consumer health wearables market and includes analysis of the opportunities and roadmap for biometric monitoring.
ZESTRON Welcomes Whitlock Associates as New Addition to their Existing Rep Team in Florida
04/19/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, is thrilled to announce the addition of Whitlock Associates to its esteemed network of sales representatives.