-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Designers and Design Engineers: Two Sides of the Same Coin
June 1, 2016 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
Andy and Sue Critcher have been the lead designers at Total Board Solutions Limited, a UK-based design bureau, since its founding in 1998. I asked Andy to share his opinion about the friction between some PCB designers and their engineers, and what can be done to improve communications between these groups.
Andy Shaughnessy: Andy, tell us a little bit about your company and how you operate.
Andy Critcher: Total Board Solutions Limited (TBS) is a design services bureau based in the UK. We fit into our customer’s design process, providing whatever is not a core competency. This means that for some customers we perform just the layout portion of their design while for others we enter the schematic, libraries, create the layout and even get the boards fabricated and assembled—no two customers are exactly the same. When working with startups we provide the link between the concept, or idea, and product realization; providing knowledge of design process, fabricators capabilities and our experience when discussing the inevitable tradeoffs between the requirement and what is possible.
Shaughnessy: A recent survey of our PCB designer readers found that there’s often friction between PCB designers and engineers. Some designers say, only half-jokingly, that their EEs are their biggest challenge. Why do you think there’s such disconnect?
Critcher: Looking solely from the PCB side, I think that the disconnect mainly arises from the lack of understanding of what a PCB designer actually does, it is perceived as a simple task of dot joining and that anyone can do it. I know that this is a bit of a cliché but it does seem to hold true. As an example, in a number of the companies that I have worked with, PCB progress meetings are held and the PCB designer is never asked to attend; their input can be easily be determined by the engineering team/project manager.
This perception is backed up by the lack of formal qualification for PCB designers—for my generation, we generally started off as mechanical draughtsman in the traditional drawing office and then moved to the PCB section.
This perception means that the status of the PCB designer is quite low, so when they advise the engineer that something is not possible this can be met with a certain amount of derision. The engineer possibly thinks that the PCB designer is just being obstructive, while conversely, the PCB designer thinks that the engineer is very dismissive of his knowledge, capabilities, opinion, etc.
Let’s look at the issue from the engineer’s perspective. By providing design consultancy, we are fortunate enough to be a lot more involved in the engineer’s world, including some of the problems that they have to deal with as part of the overall product development. One engineer explained that the design part was relatively straightforward, but the need to meet cost, functionality, component sourcing, obsolescence, test plans, as well as reading through 150+ pages of documentation on a device’s timing “makes life interesting.” As PCB designers, we tend to have a lot of questions, especially about the newer technology, so we can bombard the engineer with a number of questions concerning unfamiliar topics expecting immediate answers, and normally at this point the pressure to get it finished is already building.
To read this entire article, which appeared in the April 2016 issue of The PCB Design Magazine, click here.
Suggested Items
SMTA’s Conducts First UHDI Symposium
03/29/2024 | Marcy LaRont, PCB007 MagazineSMTA’s first UHDI Symposium in Peoria, Arizona, on Tuesday, March 26 featured a standout full-day technical program with 11 separate presentations on what will be required for our companies to move to ultra HDI manufacturing. The event was the brainchild of Tara Dunn, SMTA director of training and education. It included a compelling and collaborative presentation by David Haboud of Altium, John Johnson of American Standards Circuits, and Chrys Shea of Shea Engineering, who had spent the past several weeks creating and building an appropriate SMT test board vehicle for UHDI, something that was passed around for all conference goers to see and touch.
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.